Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Easy question on HP 5920

calleghf
Occasional Advisor

Easy question on HP 5920

Hello,

I'm not a networking guy and need to deploy a 200-HC Vmware cluster solution. One of the requirements is that the the ports switches where I have connected the servers and IP storage devices need to be enabled for IPv6 and multicast in order to be automatically deployed. How can I verify if IPv6 is enabled and multicast too on these ports ?

We have no VLAN configured just the default one.

 

Thanks a lot

Fausto  

3 REPLIES
johnk3r
Respected Contributor

Re: Easy question on HP 5920

What is the switch model?
**************************************
ATP FLEXNETWORK V3 | ACSA
calleghf
Occasional Advisor

Re: Easy question on HP 5920

Model is HP 5920 

johnk3r
Respected Contributor

Re: Easy question on HP 5920

OK.
These settings are not configured by default. You have to enable and configure as needed.

**************************************
ATP FLEXNETWORK V3 | ACSA