Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Enable ACL hit count Comware7 ?

 
drolfe
Valued Contributor

Enable ACL hit count Comware7 ?

HI, I've enable info-center

On my acl rules I have tried both logging and logging counting 

I can see the below in my buffer

%Mar 23 05:16:54:144 2016 HP-5900-Stack ACL/6/PFILTER_STATIS_INFO: -Slot=2; Ten-GigabitEthernet2/0/46 (outbound): Packet-filter 3200 rule 1260 deny ip destination X.X.X.X 0 logging 8 packet(s).

But when I run

dis acl number 3200

No hits are showing, what am I missing here ?

4 REPLIES 4
16again
Respected Contributor

Re: Enable ACL hit count Comware7 ?

On Cisco equipment I ran into this as well.
It seems like acl hit count will only increment for ACLs applied to control plane  (like snmp /telnet http access of switch) but not when applied to data plane. 

drolfe
Valued Contributor

Re: Enable ACL hit count Comware7 ?

HI, Thanks for the reply,

I was thinking the same except...

The log show the hit count per a 5 minute interval so why can't I see it on the ACL

%Mar 23 05:16:54:144 2016 HP-5900-Stack ACL/6/PFILTER_STATIS_INFO: -Slot=2; Ten-GigabitEthernet2/0/46 (outbound): Packet-filter 3200 rule 1260 deny ip destination X.X.X.X 0 logging 8 packet(s).

Regards, Daniel

 

Highlighted
aroman
Occasional Visitor

Re: Enable ACL hit count Comware7 ?

It seems on Comware v7, you need to use this command instead:

display packet-filter statistics interface <inteface type> >interface ID> {inbound | outbound}

reybilan
Occasional Visitor

Re: Enable ACL hit count Comware7 ?

It doesn't show if the acl is being hit.  Any configs that we need to add on the VLAN interface for this to work?

 

<switch>disp version
HP Comware Software, Version 7.1.045, Release 2311P01

<switch>display packet-filter verbose int vlan6 outbound
Interface: Vlan-interface6
Out-bound policy:
ACL 3006
rule 1 permit tcp destination 10.128.6.0 0.0.0.255 established logging
rule 3 permit tcp source 10.128.7.0 0.0.0.255 destination 10.128.6.0 0.0.0.255 destination-port eq 3389
rule 4 permit tcp source 10.130.7.0 0.0.0.255 destination 10.128.6.0 0.0.0.255 destination-port eq 3389
rule 5 permit tcp source 10.8.0.0 0.3.255.255 destination 10.128.6.0 0.0.0.255 destination-port eq 22
rule 7 permit tcp source 10.8.0.0 0.3.255.255 destination 10.128.6.0 0.0.0.255 destination-port eq 443
rule 9 permit tcp source 10.8.0.0 0.3.255.255 destination 10.128.6.0 0.0.0.255 destination-port eq 3389
rule 10 permit tcp source 10.8.0.0 0.3.255.255 destination 10.128.6.0 0.0.0.255 destination-port eq 445
rule 15 permit tcp source 10.128.0.0 0.0.255.255 destination 10.128.6.0 0.0.0.255 destination-port eq 443
rule 16 permit tcp source 10.128.17.0 0.0.0.255 destination 10.128.6.0 0.0.0.255 destination-port eq 8443
rule 20 permit ip source 10.128.9.0 0.0.0.255 destination 10.128.6.0 0.0.0.255

rey bilan