HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware 3com E4210-26 ports

 
anjosdeasso
Occasional Visitor

Firmware 3com E4210-26 ports

Somebody 

Does anyone have the firmware of the 4210-26 switch?

Sorry my english, i used google translator.

9 REPLIES
parnassus
Honored Contributor

Re: Firmware 3com E4210-26 ports

Probably 3Com 4210 Switch Series was the HP 3100 SI (v1) Dwitch Series which wad based on Comware 3.10 as the 3Com...not totally sure (I should carefully verify) about the name change...but try to look here:

http://h20566.www2.hpe.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=4177232

and compare the current running Firmware with the one available for "HP A3100-24 SI Switch with 2 Slots" (24 ports + 2 Slots = 26 of 4210-26?).
VoIP-Buddy
HPE Pro

Re: Firmware 3com E4210-26 ports

anjosdeasso,

Can you share with us the 3Com or HPE part number and Serial number?  It's a little hard to know what you have without that information.  I can look it up for you.

For example, if you had a 4210G (Gigabit switch), that is related to the 4510G and a 5120 EI.  All of them run Comware 5.

We have a lot of switch products.  In order to proceed I need to know exactly what you have.  You can also get that information from the swtich with the display version and diaplay device manuinfo commands.

Regards,

David

anjosdeasso
Occasional Visitor

Re: Firmware 3com E4210-26 ports

My serial number is:

Confidential Info Erased

VoIP-Buddy
HPE Pro

Re: Firmware 3com E4210-26 ports

Hi!

I didn't get a hit on that.  I'll need the 3Com part number or HPE J number.  Can you send output from display version and display device manuinfo?

David

anjosdeasso
Occasional Visitor

Re: Firmware 3com E4210-26 ports

Model N 3CR17333-91 é isso?

VoIP-Buddy
HPE Pro

Re: Firmware 3com E4210-26 ports

Perfect!  That's what I needed!  That 3CR17333-91 is a JE026A switch.

There is one version available from 2013... https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=JE026A

I didn't realize that that was such an old switch.  It is Comware 3.

Regards,

David

Ali-Asim
Occasional Collector

Re: Firmware 3com E4210-26 ports

Hi Buddy

Im having similar issue, this post seem helpful for me.

Will this work on 3CR17333A-91 ? there is an added "A"

Ali-Asim
Occasional Collector

Re: Firmware 3com E4210-26 ports

VoIP-Buddy
HPE Pro

Re: Firmware 3com E4210-26 ports

Hi Ali-Asim!

Just be careful about what code you choose.  Look at the release notes to ensure that your model is supported by the code you download.  A 4210 "A" is different than a non-A version.  Also follow the upgrade instructions in the release notes to the letter.

FYI... a 3CR17333A is also a JF427A

Also, if you would like to do part lookups like that, you can go to this web site to search for products, downloads, and documentation:

https://h10145.www1.hpe.com/support/SupportLookUp.aspx

Regards,

David