Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

FlexFabric 5940: What QoS features are not supported by the hardware

mjsaarin
Occasional Contributor

FlexFabric 5940: What QoS features are not supported by the hardware

Hello,

Recently, I tried to configure an outbound QoS profile that would rewrite the service VLAN tag. To my surprise, the switch replied with message:

 Failed to apply classifier-behavior match in policy remark to the outbound direction of interface Ten-GigabitEthernet2/0/33. The operation is not supported.

The policy and the corresponding classifiers and behaviours in question look like this:

qos policy remark
  classifier match behavior remark-vlan
traffic classifier match operator and
  if-match service-vlan-id 10
traffic behavior remark-vlan
  remark service-vlan-id 20

 

Where could I find the list of QoS features 5940 swiches support? The one I tried above obviously isn't included in them,. Such a list would be useful if it existed.

 

Best regards,

 

Matti Saarinen

 

 

 

 

1 REPLY
akg7
Visitor

Re: FlexFabric 5940: What QoS features are not supported by the hardware

Please refer below link for HPE FlexFabric 5940 Switch.

https://support.hpe.com/hpsc/doc/public/display?docId=c05212267