HPE Community
Comware Based
1753487 Members
4568 Online
108794 Solutions
New Discussion

Re: Forward syslog messages as SNMP traps

 
JohnCoffe
Occasional Collector

‎10-23-2011 11:54 PM - edited ‎10-23-2011 11:55 PM

‎10-23-2011 11:54 PM - edited ‎10-23-2011 11:55 PM

Forward syslog messages as SNMP traps

Is it possible to send syslog messages as snmp trap on a ProCurve J9088A Switch 2610-48?

Like an IOS:

 

Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#logging history informational

Router(config)#snmp-server enable traps syslog

Router(config)#snmp-server host 172.25.1.1 ORATRAP syslog

Router(config)#end

Router#

0 Kudos
1 REPLY 1
hb9cjs
Occasional Visitor

‎11-16-2011 04:03 AM

‎11-16-2011 04:03 AM

Re: Forward syslog messages as SNMP traps

Hi

 

Try the following commands

 

 info-center loghost source LoopBack1
 info-center loghost 192.168.137.31
 info-center logbuffer channel 2 size 1024

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.