Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

H3C S5500 link-aggregation

Asim_Ali
Occasional Advisor

H3C S5500 link-aggregation

Hello

 

Have H3C S5500 switch using as aggregation switch,

interface bridge-aggregation1

port link-type trunk

port trunk permit VLAN all

link-aggregation mode dymanic

link-aggregation load-sharing mode source-ip

 

 

had to convert that set of commands on HP 2920 switch

which is done as

trunk <ports> trk1 LACP

 

having a little consfusion in what does the last line on H3C switch mean ?

how to make it on HP 2920 ?

 

Thanks

1 REPLY
Uma_Maheswar
Frequent Advisor

Re: H3C S5500 link-aggregation

My guess, no addtional command is needed because L3-Based load-balance is default (not Load-Sharing)

 

 

Check "SHOW TRUNK"

 

Load Balancing Method: L3-based (default)

Port | Name Type | Group Type
------ + -------------------------------- --------- + ----- --------
1/41 | 100/1000T | Trk1 LACP
1/42 | 100/1000T | Trk1 LACP