H3C S7510E - POE configure

[robkwild]

hi all,

as i have finally configured all the ports on the switch and connected it to my network, how do i make poe work on the switch as when i connect a poe wifi access point to it, nothing happens, no lights on the switch and wifi AP

do i need to configure poe first on the switch

i do this -

<Sysname> system-view

[Sysname] interface GigabitEthernet 0/0/13

[Sysname-GigabitEthernet1/0/1] poe enable

but it gives me an error about poe not enabled or fault, i cant remember sorry

many thanks,

rob

[VoIP-Buddy]

Hi Rob!

Do you have PoE power supplies?  They have 2 power plugs on them?

Do you have the line cards that support PoE?

Regards,

David

[robkwild]

the psu i have -

http://www.h3c.com.hk/Technical_Support___Documents/Technical_Documents/Switches/H3C_S7500E_Series_Switches/Installation/Power_Supply_Manual/H3C_S7500E_Power_CG(V1.00)/

i have two

PSR1400-A

and the switch -

LSQM1GV48SA0

what do you mean by line cards?

[VoIP-Buddy]

Rob,

Sorry.  You have the wrong PSU...

Table 1  Classification of the power modules

Model

Height

Power input (AC/DC)

PoE output support

PSR320-A

1U

AC

No

PSR320-D

1U

DC

No

PSR650-A

1U

AC

No

PSR650-D

1U

DC

No

PSR1400-A

3U

AC

No

PSR1400-D

3U

DC

Yes

PSR2800-ACV

3U

AC

Yes

You need the last one to have PoE support.

The module appears to be PoE ready.

David

[robkwild]

thanks