Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

H3C S7510E - POE configure

 
robkwild
Frequent Advisor

H3C S7510E - POE configure

hi all,

as i have finally configured all the ports on the switch and connected it to my network, how do i make poe work on the switch as when i connect a poe wifi access point to it, nothing happens, no lights on the switch and wifi AP

do i need to configure poe first on the switch

i do this -

<Sysname> system-view

[Sysname] interface GigabitEthernet 0/0/13

[Sysname-GigabitEthernet1/0/1] poe enable

but it gives me an error about poe not enabled or fault, i cant remember sorry

many thanks,

rob

4 REPLIES
VoIP-Buddy
HPE Pro

Re: H3C S7510E - POE configure

Hi Rob!

Do you have PoE power supplies?  They have 2 power plugs on them?

Do you have the line cards that support PoE?

Regards,

David

robkwild
Frequent Advisor

Re: H3C S7510E - POE configure

VoIP-Buddy
HPE Pro

Re: H3C S7510E - POE configure

Rob,

Sorry.  You have the wrong PSU...

Table 1  Classification of the power modules

Model

Height

Power input (AC/DC)

PoE output support

PSR320-A

1U

AC

No

PSR320-D

1U

DC

No

PSR650-A

1U

AC

No

PSR650-D

1U

DC

No

PSR1400-A

3U

AC

No

PSR1400-D

3U

DC

Yes

PSR2800-ACV

3U

AC

Yes

You need the last one to have PoE support.

The module appears to be PoE ready.

David

robkwild
Frequent Advisor

Re: H3C S7510E - POE configure

thanks