Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 5500 HI NAT configuring

Vsevolod_
Occasional Visitor

HP 5500 HI NAT configuring

Hi guys ! 

 

Does anyboby know HP 5500 HI support NAT ?

 

I have 2 HP 5500 HI stack, I need to config static PAT. I can't find any information about NAT configuring in configuration guides for this switch. 

 

Thank you for reply ! 

3 REPLIES
manuel.bitzi
Trusted Contributor

Re: HP 5500 HI NAT configuring

Hi

 

no, it doesn't. Use a router or firewall.

 

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland
Vsevolod_
Occasional Visitor

Re: HP 5500 HI NAT configuring

Thank you for reply. 

It's amazing, there are a lot of features like BGP, MPLS, but there is no NAT..

Apachez-
Trusted Contributor

Re: HP 5500 HI NAT configuring

I can agree but at the same time thats most likely limitations of the silicon being used (A-series use mainly broadcom chips).

 

While we are complaining I wish to complain that the FIBs in all HP A-series are 512k or similar, meaning a full Internet IPv4 BGP-table wont fit anylonger :-(

 

Personally I think it should be an easy task for a giant such as HP to produce hardware that have decent amount of memory in year 2014 :-S