HP A5800 policy based routing using QOS on vlan

[BHDofa]

Hi

i need to redirect all the traffic from 192.168.10.11 to new GW 192.168.1.2 except traffic to private range 192.168.0.0 and 10.10.10.0

vlan 100 have a subnet 192.168.10.0/24 where machine reside.

I created QOS policy and apply it to vlan 100 but after that all traffic to 192.168.10.11 stop even if i try to ping from same vlan) like 192.168.10.4 ping will fail=

Please if you can share the light where i went wrong

ACL number 3000

 rule 10 permit ip source 192.168.10.11 0 destination 192.168.0.0 0.0.255.255

 rule 20 permit ip source 192.168.10.11 0 destination 10.10.10.0 0.0.0.255

ACL number 3001

 rule 10 permit ip source 192.168.10.11 0

traffic classifier den operator and

 if-match acl 3000

traffic classifier Per operator and

 if-match acl 3001

traffic behavior Per

 filter permit

traffic behavior den

 redirect next-hop 192.168.1.2 fail-action forward

qos policy Rout_to_bb_R2

 classifier per behavior Per

 classifier den behavior den

qos vlan-policy Rout_to_bb_R2 vlan 100 inbound

p.s. Default static rout on switch is

ip route-static 0.0.0.0 0 192.168.1.1

[BHDofa · Accepted solution]

I found a problem i missed order in qos policy

original was

qos policy Rout_to_bb_R2

classifier per behavior Per

classifier den behavior den

need to be

qos policy Rout_to_bb_R2

classifier den behavior den

classifier per behavior Per

Regards