HP5130 redirect URL format

[Dinesh4]

Hi Experts,
I would like to use a static URL for performing redirection actions for posture and CWA on Comware device.

Is there is a specific format that needs to be followed?
Could you share example or references that I could use for this use at my end?

Following is the information from the switch:

<NAC-5130-2>display version
HPE Comware Software, Version 7.1.070, Release 3208P10
Copyright (c) 2010-2018 Hewlett Packard Enterprise Development LP
HPE 5130 48G PoE+ 4SFP+ EI Switch uptime is 1 week, 5 days, 18 hours, 31 minutes
Last reboot reason : User reboot

Boot image: flash:/5130ei-cmw710-boot-r3208p10.bin
Boot image version: 7.1.070, Release 3208P10
Compiled Aug 16 2018 11:00:00
System image: flash:/5130ei-cmw710-system-r3208p10.bin
System image version: 7.1.070, Release 3208P10
Compiled Aug 16 2018 11:00:00

Slot 1:
Uptime is 1 week,5 days,18 hours,31 minutes
5130-48G-PoE+-4SFP+ (370W) EI JG937A with 1 Processor
BOARD TYPE: 5130-48G-PoE+-4SFP+ (370W) EI JG937A
DRAM: 1024M bytes
FLASH: 512M bytes
PCB 1 Version: VER.B
Bootrom Version: 147
CPLD 1 Version: 002
Release Version: HPE 5130 48G PoE+ 4SFP+ EI JG937A-3208P10
Patch Version : None
Reboot Cause : UserReboot
[SubSlot 0] 48GE+4SFP Plus

Thank you

[rajkumar787]

Hi Dinesh,

You may find the Security configuration guide in the below link.

https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=8737396&docLocale=en_US&docId=emr_na-a00017780en_us