Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP5920 Web Interface

 
Vambo1
Occasional Visitor

HP5920 Web Interface

Hi

I am new to HP devices and therefor new to this forum. I am looking for the full commands to enable and set login credentials for the web interface on the HP5920 switch.

I have searched the web but only managed to find how to enable the web gui which I've done but am unable to login to it.

Thank you in anticipation.

7 REPLIES
Borislav Ivanchev
Occasional Advisor

Re: HP5920 Web Interface

try this

system-view
 local-user <username> class manage
 password simple <password>
 service-type ftp
 service-type ssh telnet terminal http https
 authorization-attribute user-profile admin
 authorization-attribute user-role network-admin

you may wish to set only:

service-type ssh http https 

 

Vambo1
Occasional Visitor

Re: HP5920 Web Interface

Hi Borislav

 

Thank you for the very quick reply.

I have tried these commands and ecountered this error;


[HP5900-SW5]local-user admin
[HP5900-SW5-luser-manage-admin]class manage password simple **********
^
% Unrecognized command found at '^' position.

Borislav Ivanchev
Occasional Advisor

Re: HP5920 Web Interface

keep the inline as above:

local-user <username> class manage 
#on one line and
password simple ******
#on the next line

Vambo1
Occasional Visitor

Re: HP5920 Web Interface

Hi Borislav

I have managed to login to the web interface now. Many many thanks.

I have just 3 more questions;

1. If I reset the password on the CLI login does this also change the web interface login or is this a seperate password?

2. How do you view the login password aging time in the CLI?

3. I know this is all down to experience but does HP actually publish all this information because I could not find it anywhere.

Thank you once again.

Borislav Ivanchev
Occasional Advisor

Re: HP5920 Web Interface

1. If I reset the password on the CLI login does this also change the web interface login or is this a seperate password?

- you'll be reseting the password based on the username, not for a CLI or WEB 

2. How do you view the login password aging time in the CLI?

 - I'm not quite sure what you are will to do with password aging, but I'll strongly advise agains it - unless you have set the date and time correctly and you are sure what you are doing. However you may consult with the "R23xx-HP 5920 & 5900 Security Configuration Guide" (see below)

3. I know this is all down to experience but does HP actually publish all this information because I could not find it anywhere.

 - Of course HPE does it, but I have to admit, might be a change to find what you are looking for through google, although to be fair, it is getting better lately. 

Go to: https://www.hpe.com/us/en/support.html  and select = > My Networking Portal => search for e.g. 5920 => select the Switch from the list and then [Show selected items] on the bottom right you'll get a list with only useful links about this product. => click on Support center (For manuals, FAQs, etc.) and you'll find in the [Manuals] tab all the documents HPE has published about this product.

Vambo1
Occasional Visitor

Re: HP5920 Web Interface

Hi

Currently the password aging is set to 365 days but I want to remove this, so password aging is disabled.

 

Thank you

Vambo1
Occasional Visitor

Re: HP5920 Web Interface

Hi Borislav

 

I have managed to undo the password aging and set it to disabled.

Thank you very much for taking the time to help me.

:)