HPE FlexNetwork 10508 Switch Chassis

[Licha]

Dear, I am new here and would like your help with a question based on your experiences.

I have an HPE FlexNetwork 10508 switch chassis and I need to shut it down, that is, shut it down, not reboot it.

Do I have to follow any procedure for an orderly shutdown or just turn it off and disconnect the electrical connection?
And if I have to take into account something else.

Thanks a lot

[akg7 · Accepted solution]

Hello @ Licha,

There are no particular procedure.
You can save the configuration and just turn it off and disconnect the electrical connection.

Thanks!