Comware Based
1748093 Members
5971 Online
108758 Solutions
New Discussion

Re: Help with 5130 EI STP link versus another switch in another site

 
SOLVED
Go to solution
Francesco_R
Occasional Contributor

Help with 5130 EI STP link versus another switch in another site

Hi to all, 

first of all, i'm a newbie.

I have this problem and i'm not sure which is the best solution: i have a 5130 EI switch in my HQ with STP enabled, and i have a remote office connected via Wireless link and an 2930F aruba switch with STP enabled.

We have choosed MSTP config.

So, I have only ONE port that link my HQ site to remote site, and is automatically set by 5130 as stp root port.

i realized that, when the wireless link fail, my entire HQ network flap and temporary go down because the 5130  observe a topology change. 

Our actual present topology has no redundant links for this remote site and wireless link go down one or two times at month.

I'm not sure if i can disable stp on a single port (and i think not) so.. how i can prevent the 5130 to calcolate stp topology on that port (and fail the entire network)? 

I hope I have been clear enough...

Thanks in advance to all.

 

3 REPLIES 3
San0707
Occasional Advisor

Re: Help with 5130 EI STP link versus another switch in another site

Hi Francesco,

 

To overcome the problem you can make HQ 5130 Switch as Root Bridge. After which only link which flaps will recaluclate STP

Its not recommended to disbale STP. as it helps in overcoming any loops which may occure deu to some config or physical connectivity.

To make switch as Root Bridge you can reduce priorty of switch.

 

 

Thanks

San0707

I am HPE Employee

Hit Like if you find this Helpful

 

Giri12
HPE Pro
Solution

Re: Help with 5130 EI STP link versus another switch in another site

[RIGNT-GigabitEthernet1/0/1]bpdu-drop any
[RIGNT-GigabitEthernet1/0/1]

Wait till the bpdu ages out

This will prevent the port from becoming root port

Please check this & post the results here

BR

Giri


Accept or Kudo
Francesco_R
Occasional Contributor

Re: Help with 5130 EI STP link versus another switch in another site

Thanks Giri12, 

i have tried your solution and it works!

Now on this port the "bpdu-drop any" works like a charm and network is stable even when radio bridge fail.

Thanks again!