Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure Link Aggregation between HP A5500 and HP 2620 Switch

 
Chanthima
Occasional Contributor

How to configure Link Aggregation between HP A5500 and HP 2620 Switch

Please suggest me to configure Link Aggregation between HP A5500 and HP 2620 Switch.

After I configure link aggregation on HP A5500 and HP 2620.

It can not communicate.

I test ping from HP A5500 to HP 2620 : Request time out.

 

Configuration HP 2620

SW-2620(Config)# vlan 109

SW-2620(vlan-109)# name vz

SW-2620(vlan-109)# ip address 192.168.12.2/24

SW-2620(vlan-109)# untagged 1-24

SW-2620(vlan-109)# exit

 

SW-2620(Config)#  trunk 25-26 trk1 lacp

SW-2620(Config)# vlan 109

SW-2620(vlan-109)# tag trk1

SW-2620(vlan-109)# exit

SW-2620(Config)# wr mem

 

SW-2620(Config)#  ping 192.168.12.1

Request time out.

SW-2620(Config)#

 

Configuration HP A5500

 

[SW-A5500] vlan 999

[SW-A5500-Vlan999] int vlan 999

[SW-A5500-Vlan-interface999] ip address 192.168.1.1 24

[SW-A5500-Vlan-interface999] quit

 

[SW-A5500] int bridge-aggregation 1

[SW-A5500-Bridge-aggregation1] link-aggregation mode dynamig

[SW-A5500-Bridge-aggregation1] quit

 

[SW-A5500] int gig 1/0/31

[SW-A5500-GigabitEthernet1/0/31] port link-aggregation group 1

[SW-A5500-GigabitEthernet1/0/31] int gig 1/0/32

[SW-A5500-GigabitEthernet1/0/32] port link-aggregation group 1

[SW-A5500-GigabitEthernet1/0/32] quit

 

[SW-A5500] int bridge-aggregation 1

[SW-A5500-Bridge-aggregation1] port link-type trunk

[SW-A5500-Bridge-aggregation1] port trunk permit all

[SW-A5500-Bridge-aggregation1] quit

 

[SW-A5500] save

 

[SW-A5500]

 

Thank and Best Regard,

Chanthima

 

1 REPLY
johnk3r
Respected Contributor

Re: How to configure Link Aggregation between HP A5500 and HP 2620 Switch

Hi !

 

The A5500 switch change the PVID of link-aggregation:

port trunk pvid vlan 999

**************************************
ATP FLEXNETWORK V3 | ACSA