Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

How to enable "portfast" on HP A5120-EI?

 
SOLVED
Go to solution
Highlighted
Sovransky
Visitor

How to enable "portfast" on HP A5120-EI?

Hi

Is there a  "portfast" mode analogue on HP A5120-EI ? How to turn it on?

3 REPLIES 3
parnassus
Honored Contributor

Re: How to enable "portfast" on HP A5120-EI?

Yes, there is.

At interface context level you can execute the stp edged-port enable CLI command to let an interface be treated as an edge port by STP.

Directly from HPE 5120 EI Switch Series Layer 2 - LAN Switching Configuration Guide:

stp-edged-port.png

 

 

Sovransky
Visitor

Re: How to enable "portfast" on HP A5120-EI?

Parnassus, thanks for your reply!

Is it good idea to connect HP "edge-ports" to vmware esxi vswitch ports in "Route based on originating port ID" mode? 

ESXi Vswitch0 settings:  Notify switches - YES,  Failback - Yes, Failback mode - Active Active (2 physical adapters)

parnassus
Honored Contributor
Solution

Re: How to enable "portfast" on HP A5120-EI?


@Sovransky wrote: Is it good idea to connect HP "edge-ports" to vmware esxi vswitch ports in "Route based on originating port ID" mode?

Yes, it is.