Comware Based
1748184 Members
3919 Online
108759 Solutions
New Discussion юеВ

Configuring the SFP KIT Stacking the A3600?

 
temuri426
Frequent Advisor

How to install A3600 Switch SFP Stacking Kit ?

hp-jd324b-hp-a3600-switch-sfp-stacking-kit-0231a0kp-h3c.jpghello ,

 

Can you please provide any information how to use HP A3600 Switch SFP Stacking KIT (JD324B) ?

 

I've read the manual about it but it seems that 3600 switch doesn't have any hole for this device. this stacking kit is made for only 2424M, 2300, 2500 siwtches.

 

Is there any stacking cable for 3600 switches, i need it in my IRF configuration?

 

Also interested if it will be possible to use two such stackable cables bewteen switches (agregate them) ?

 

If this stackable cable is not suppotred in 3600 switches , what will be another solution for stacking? can i use just RJ45 gigabit sfp tranceivers insead?

 

many thanks

4 REPLIES 4
cenk sasmaztin
Honored Contributor

Re: How to install A3600 Switch SFP Stacking Kit ?

:) very wrong information (I can see this switch guide)

A3600 switch dont support JD324B module..

 

JD324B old procurve 2300 2500 series stacking cable and end of life.

 

you must use ethernet port for IRF

 

 

cenk

temuri426
Frequent Advisor

Re: How to install A3600 Switch SFP Stacking Kit ?

 

showneek
Respected Contributor

Re: How to install A3600 Switch SFP Stacking Kit ?

Hi, suppose that the picture is only for illustration and HP 3600 Switch SFP Stacking Kit (JD324B) is OK. It is on the official site, quick specs and official IRIS configurator too.

 

Check compatibility:

http://h10010.www1.hp.com/wwpc/sg/en/sm/WF32a/A1-329290-64274-3965981-3965981-4201116-4201117.html

 

Pre-acquisition info:

http://h17007.www1.hp.com/us/en/support/converter/index.aspx?productNum=JD324B

 

So suppose this should work with these switches...

 

And yes, you can use SFP RJ45 transceiver too.

 

Regards,

Jan

adrianoamlfull
Occasional Visitor

Configuring the SFP KIT Stacking the A3600?

Please
I need to configure stacking 03 Switches HP A3600.
What are the commands needed?