How to stack a HP 5406zl with a 5130?

[hpbon]

Thinking og bundling 2 lets say port 1-2 on both.

Which commands are needed at 5406 and which at 5130?

Regards, Lars.

[LucianoCarvalho · Accepted solution]

Hello hpbon.

I think you would need a configuration like this.

Switch 5130

#
interface Bridge-Aggregation1
description To switch 5406
port link-type trunk
port trunk permit vlan 1 100 200
link-aggregation mode dynamic
#
#
interface GigabitEthernet1/0/1
port link-mode bridge
description  To switch 5406
port link-type trunk
port trunk permit vlan 1 100 200
broadcast-suppression 20
port link-aggregation group 1
#
#
interface GigabitEthernet1/0/2
port link-mode bridge
description  To switch 5406
port link-type trunk
port trunk permit vlan 1 100 200
broadcast-suppression 20
port link-aggregation group 1
#

Switch 5406

trunk A1-A2 trk1 lacp
#
vlan 1
name "DEFAULT_VLAN"
untagged Trk1
#
vlan 100
name "Server"
tagged Trk1
#
vlan 200
name "User"
tagged Trk1
#

[hpbon]

---

interface GigabitEthernet1/0/1
port link-mode bridge

Giving me:

[SrvRack01-GigabitEthernet1/0/47]port link-mode bridge
^
% Unrecognized command found at '^' position.
.

firmware difference maybe?

Regards, Lars.

[hpbon]

But anyway... it works. Thanks!