How to view the uptime of a specific irf member

[PhilippeD]

Hello Guys,

I have been looking everywhere for the answer but I can not find it.

I was used to working with avaya switches where I could just see what the uptime of each stack-member was by typing a simple cli command.

Now I'm using HP comware based switches and nowhere I can find a cli command to check the uptime of the individual members.

Can anybody tell me how I can check the uptime of individual irf members?

Thanks,

[Peter_Debruyne]

Hi Philippe,

this can be seen by running the display version locally on the desired member, so you need to switch to the member console first. Example output:

[switch-irf]display version
HP Comware Platform Software
Comware Software, Version 5.20.99, Release 2108P08
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP A3600-24 v2 EI Switch uptime is 0 week, 0 day, 0 hour, 5 minutes

HP A3600-24 v2 EI Switch with 1 Processor
256M    bytes SDRAM
2M      bytes Nor Flash Memory
128M    bytes Nand Flash Memory
Config Register points to Nand Flash

Hardware Version is Ver.A
CPLD Version is 001
BootRom Version is 125
[SubSlot 0] 24FE+4SFP+2Combo GE Hardware Version is Ver.A

[switch-irf]irf switch-to 2
[switch-irf]
<switch-irf-Slave#2>
#Jan  1 00:11:28:052 2010 switch-irf SHELL/4/LOGIN: -Slot=2;
 Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console
#Jan  1 00:11:27:837 2010 switch-irf SHELL/4/LOGIN:
 Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console
%Jan  1 00:11:28:221 2010 switch-irf SHELL/5/SHELL_LOGIN: -Slot=2; Console logged in from aux0.
%Jan  1 00:11:27:838 2010 switch-irf SHELL/5/SHELL_LOGIN: Console logged in from aux0.
<switch-irf-Slave#2>
<switch-irf-Slave#2>display version
HP Comware Platform Software
Comware Software, Version 5.20.99, Release 2108P08
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP A3600-24 v2 EI Switch uptime is 0 week, 0 day, 0 hour, 2 minutes

HP A3600-24 v2 EI Switch with 1 Processor
256M    bytes SDRAM
2M      bytes Nor Flash Memory
128M    bytes Nand Flash Memory
Config Register points to Nand Flash

Hardware Version is Ver.A
CPLD Version is 001
BootRom Version is 125
[SubSlot 0] 24FE+4SFP+2Combo GE Hardware Version is Ver.A

<switch-irf-Slave#2>quit
[switch-irf]

Hope this helps,

Best regards,Peter

[PhilippeD]

Hello Peter,

Thanks, that works :)

I was hoping to see a list of the irf members with their individual uptime but this will do...

Philippe

[PhilippeD]

Peter,

it works on comware5 but on comware7 this command doesn't seem to exist anymore....

Do you know how to do this in comware 7?

thanks,

Philippe