Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp A5500 and procurve 2610

oscarfourie
Occasional Contributor

Hp A5500 and procurve 2610

I have configured a Hp a5500 and procurve 2610,

 

here is my Hp a5500 config:

 

[EMCCS01C]dis cu
#
 version 5.20, Release 2208P01
#
 sysname EMCCS01C
#
 dhcp relay server-group 1 ip 192.168.1.5
#
 irf mac-address persistent timer
 irf auto-update enable
 undo irf link-delay
#
 domain default enable system
#
 router id 172.16.1.1
#
 telnet server enable
#
vlan 1
 description UNUSED
 name UNUSED
#
vlan 100
 description OLD VLAN
 name OLDVLAN
#
vlan 101
 description Managment
 name Managment
#
vlan 102
 description Server
 name Server
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
#
local-user mars
 password cipher F]*P8IY%Y-\X!X<]K3BK;Q!!
 authorization-attribute level 3
 service-type telnet terminal
#
interface NULL0
#
interface Vlan-interface100
 ip address 192.168.1.2 255.255.255.0
#
interface Vlan-interface101
 description Management
 ip address 172.16.1.1 255.255.255.0
#
interface Vlan-interface102
 description Server
 ip address 172.16.2.1 255.255.255.0
#
interface GigabitEthernet1/0/1
 Description Conenction to EMCCS01S
 port link-mode bridge
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 100 to 102
#
interface GigabitEthernet1/0/2
 port link-mode bridge
#
interface GigabitEthernet1/0/3
 port link-mode bridge
#
interface GigabitEthernet1/0/4
 port link-mode bridge
#
interface GigabitEthernet1/0/5
 port link-mode bridge
#
interface GigabitEthernet1/0/6
 port link-mode bridge
#
interface GigabitEthernet1/0/7
 port link-mode bridge
#
interface GigabitEthernet1/0/8
 port link-mode bridge
#
interface GigabitEthernet1/0/9
 port link-mode bridge
#
interface GigabitEthernet1/0/10
 port link-mode bridge
#
interface GigabitEthernet1/0/11
 port link-mode bridge
#
interface GigabitEthernet1/0/12
 port link-mode bridge
#
interface GigabitEthernet1/0/13
 port link-mode bridge
#
interface GigabitEthernet1/0/14
 port link-mode bridge
#
interface GigabitEthernet1/0/15
 port link-mode bridge
#
interface GigabitEthernet1/0/16
 port link-mode bridge
#
interface GigabitEthernet1/0/17
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/18
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/19
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/20
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/21
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/22
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/23
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/24
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/25
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/26
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/27
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/28
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/29
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/30
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/31
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/32
 port link-mode bridge
 port access vlan 102
#
interface GigabitEthernet1/0/33
 port link-mode bridge
 port access vlan 101
#
interface GigabitEthernet1/0/34
 port link-mode bridge
 port access vlan 101
#
interface GigabitEthernet1/0/35
 port link-mode bridge
 port access vlan 101
#
interface GigabitEthernet1/0/36
 port link-mode bridge
 port access vlan 101
#
interface GigabitEthernet1/0/37
 port link-mode bridge
 port access vlan 101
#
interface GigabitEthernet1/0/38
 port link-mode bridge
#
interface GigabitEthernet1/0/39
 port link-mode bridge
#
interface GigabitEthernet1/0/40
 port link-mode bridge
#
interface GigabitEthernet1/0/41
 port link-mode bridge
#
interface GigabitEthernet1/0/42
 port link-mode bridge
#
interface GigabitEthernet1/0/43
 port link-mode bridge
#
interface GigabitEthernet1/0/44
 port link-mode bridge
#
interface GigabitEthernet1/0/45
 port link-mode bridge
#
interface GigabitEthernet1/0/46
 port link-mode bridge
#
interface GigabitEthernet1/0/47
 port link-mode bridge
#
interface GigabitEthernet1/0/48
 Description Connection to Telkom Cisco Router
 port link-mode bridge
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 100 to 102
#
interface GigabitEthernet1/0/49
 port link-mode bridge
 shutdown
#
interface GigabitEthernet1/0/50
 port link-mode bridge
 shutdown
#
interface GigabitEthernet1/0/51
 port link-mode bridge
 shutdown
#
interface GigabitEthernet1/0/52
 port link-mode bridge
 shutdown
#
 load xml-configuration
#
user-interface aux 0
 authentication-mode scheme
user-interface vty 0 15
 authentication-mode scheme
#
return
[EMCCS01C]

 

here is the procure 2610 configs

 


Running configuration:

; J9085A Configuration Editor; Created on release #R.11.25

hostname "EMCCS01S"
max-vlans 256
ip default-gateway 192.168.1.1
snmp-server community "public" Unrestricted
vlan 1
   name "Management"
   no ip address
   no untagged 1-28
   exit
vlan 100
   name "VLAN100"
   untagged 1-24
   no ip address
   tagged 25-28
   exit
vlan 101
   name "VLAN101"
   ip address 172.16.1.2 255.255.255.0
   tagged 25-28
   exit
vlan 102
   name "VLAN102"
   no ip address
   tagged 25-28   
exit
spanning-tree
password manager

EMCCS01S#


Running configuration:

; J9147A Configuration Editor; Created on release #W.14.38

hostname "EMCCS02S"
module 1 type J9147A
ip default-gateway 192.168.1.1
vlan 1
   name "Management"
   untagged 22,48
   no untagged 1-21,23-47
   no ip address
   exit
vlan 100
   name "OLDVLAN"
   untagged 1-21,23-47
   tagged 22,48
   no ip address
   exit
vlan 101
   name "VLAN101"
   ip address 172.16.1.3 255.255.255.0
   tagged 22,48
   exit
vlan 102
   name "VLAN102"
   no ip address
   tagged 25-28   
snmp-server community "public" unrestricted
spanning-tree
no autorun
password manager

EMCCS02S#




Running configuration:

; J9085A Configuration Editor; Created on release #R.11.25

hostname "EMCCS03S"
ip default-gateway 192.168.1.1
snmp-server community "public" Unrestricted

vlan 1
   name "Management"
   no ip address
   no untagged 1-28
   exit
vlan 100
   name "OLDVLAN"
   untagged 1-24
   no ip address
   tagged 25-28
   exit
vlan 101
   name "VLAN101"
   ip address 172.16.1.4 255.255.255.0
   tagged 25-28
   exit
vlan 102
   name "VLAN102"
   no ip address
   tagged 25-28   
exit
spanning-tree
password manager

EMCCS03S#
Running configuration:

; J9085A Configuration Editor; Created on release #R.11.30

hostname "EMCCS04S"
snmp-server community "public" Unrestricted
vlan 1
   name "Management"
   no ip address
   no untagged 1-28
   exit
vlan 100
   name "OLDVLAN"
   untagged 1-24
   no ip address
   tagged 25-28
   exit
vlan 101
   name "VLAN101"
   ip address 172.16.1.5 255.255.255.0
   tagged 25-28
   exit
vlan 102
   name "VLAN102"
   no ip address
   tagged 25-28   
password manager

EMCCS04S#

 

 

there are 4 procurves. the problem is the inter-vlan routing. when i am on one of the procurves i can not ping any of the vlans on the a5500, except the vlan 101 (this is the default vlan) my servers are sitting in the vlan 102 and vlan 100 is the old network.

can anybody tell me where i have gone wrong? and what i must do to change this?

 

3 REPLIES
Vince_Whirlwind
Trusted Contributor

Re: Hp A5500 and procurve 2610

You need to put an "ip default-gateway" on each of the procurve switches, pointing at 172.16.1.1.

 

As for your hosts in the various VLANs - you don't seem to be using VLANs 101 & 102 anywhere on the Procurves - so why are those VLANs trunked there?

Also, you obviously intend for the 5500 to be your "core" switch doing the inter-VLAN routing, so why are you trunking the VLANs on to a Cisco router? What's that for?

oscarfourie
Occasional Contributor

Re: Hp A5500 and procurve 2610

HI,

 

yes the 5500 will be the core, i was just putting all the vlans on to all the switchs.

i will configure the procurves default gatways to 172.16.1.1.

 

i am still worried about the routing

Vince_Whirlwind
Trusted Contributor

Re: Hp A5500 and procurve 2610

You might also need to run the command

"management-vlan 101"

on all the procurves.

 

As far as the routing goes, you need to get rid of all those VLANs off the link to the Cisco router and create a new VLAN just for that point-to-point link.

I'm guessing you need a default route on the 5500 pointing at the Cisco router.

On the Cisco router you need routes for each of your 5500 subnets, pointing at the 5500.