HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

IRF 5900CP + 5900AF

 
SOLVED
Go to solution
VadimM
Occasional Contributor

IRF 5900CP + 5900AF

Can I combine converged 5900CP and "ordinary" 5900AF in IRF?

I've found some compatibility matrices but there is no CP referred.

2 REPLIES
VoIP-Buddy
HPE Pro

Re: IRF 5900CP + 5900AF

VadimM,

That should be fine.  They run the same code, similar platform.  I haven't tried that lately but you would find out pretty quick if you can't.

Regards,

David

bamaskas
Advisor
Solution

Re: IRF 5900CP + 5900AF

The 5900CP and 5900AF in an IRF domain works!  In fact this configuration is useful for testing the 5900AF-XGT (10GbaseT) FCoE configuration and connectivity to 3PAR FC storage attached to the 5900CP. 2x or 4x40G IRF lossless connectivity is more than adequate.  

add the following to each IRF port for example:

interface FortyGigE1/0/50
priority-flow-control enable
priority-flow-control no-drop dot1p 3