Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

IRF LINK TIMEOUT

Beero
Occasional Contributor

IRF LINK TIMEOUT

Hello,

I have 2 HP A-10508 core switches configured as an IRF.
I am using 4 Tengig ports on each core to maintain the IRF connection.
I configured 2 Tengig ports as IRF-PORT 1, and 2 Tengig ports as IRF-PORT 2 (on both Cores)
and connected IRF PORT 1 with  IRF PORT 2 each time.


PROBLEM IS ONE OF THE CONNECTIONS give 'TIMEOUT' on link status.

I tried to reconfigure the IRF, IT Gives UP on both connections, but after 10 min the second one goes 'TIMEOUT' again.

 

IRF Commands output is attahced.

4 REPLIES
Vince_Whirlwind
Trusted Contributor

Re: IRF LINK TIMEOUT

Move the tengig ports on Chassis 1 so they are all on IRF port 1. On Chassis 2, move them all to IRF port 2.

Now connect them all.

manuel.bitzi
Trusted Contributor

Re: IRF LINK TIMEOUT

Hi

 

It looks like you have a older firmware which doesn't support irf ring topology. Put all links into IRF-Port 1/1 and 2/2 or upgrade your firmware the the latest.

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland
tejene_bhandari
Occasional Advisor

Re: IRF LINK TIMEOUT

[IPTV-Core-2]%Mar 16 21:07:12:603 2016 IPTV-Core-2 OPTMOD/4/MODULE_OUT: Ten-GigabitEthernet2/0/1: Transceiver absent.
%Mar 16 21:07:16:322 2016 IPTV-Core-2 IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet2/0/1 link status is down.
%Mar 16 21:07:16:323 2016 IPTV-Core-2 IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet2/0/1 is down.
%Mar 16 21:07:20:796 2016 IPTV-Core-2 OPTMOD/4/MODULE_OUT: Ten-GigabitEthernet2/0/3: Transceiver absent.
%Mar 16 21:07:25:053 2016 IPTV-Core-2 STM/3/STM_LINK_STATUS_DOWN: IRF port 1 is down.
%Mar 16 21:07:25:057 2016 IPTV-Core-2 IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet2/0/3 link status is down.
%Mar 16 21:07:25:058 2016 IPTV-Core-2 IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet2/0/3 is down.
%Mar 16 21:07:40:143 2016 IPTV-Core-2 OPTMOD/4/MODULE_IN: Ten-GigabitEthernet2/0/4: The transceiver is STACK_SFP_PLUS.
%Mar 16 21:07:41:341 2016 IPTV-Core-2 IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet2/0/4 link status is up.
%Mar 16 21:07:41:342 2016 IPTV-Core-2 IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet2/0/4 is up.
%Mar 16 21:07:41:483 2016 IPTV-Core-2 STM/6/STM_LINK_STATUS_UP: IRF port 1 is up.
%Mar 16 21:07:53:303 2016 IPTV-Core-2 OPTMOD/4/MODULE_IN: Ten-GigabitEthernet2/0/2: The transceiver is STACK_SFP_PLUS.
%Mar 16 21:07:55:126 2016 IPTV-Core-2 IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet2/0/2 link status is up.
%Mar 16 21:07:55:126 2016 IPTV-Core-2 IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet2/0/2 is up.
%Mar 16 21:08:01:605 2016 IPTV-Core-2 STM/2/STM_LINK_STATUS_TIMEOUT: IRF port 1 is down because heartbeat timed out.
%Mar 16 21:08:01:615 2016 IPTV-Core-2 STM/3/STM_LINK_STATUS_DOWN: IRF port 1 is down.

johnk3r
Respected Contributor

Re: IRF LINK TIMEOUT

Analyzing the above logs, configuration must be wrong. Post the switch configuration here ...

**************************************
ATP FLEXNETWORK V3 | ACSA