Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

IRF Monitoring with snmp

 
Javier Larrea
Occasional Contributor

IRF Monitoring with snmp

Hello,

I've a bunch of 5XXX switches (5812, 5700, etc) stacked each pair with IRF. Now I'm writing a script to monitor them and I'm not able to find a mib for IRF. I've found something for very old h3c models but nothing for HPE.

Any idea, examples?

 

3 REPLIES
parnassus
Honored Contributor

Re: IRF Monitoring with snmp

Look here (that's just a SKU about which you can find related Comware MIBs editions, latest V10 has this release notes document).

Javier Larrea
Occasional Contributor

Re: IRF Monitoring with snmp

Hi Parnassus,
I’ve been using those mib files to build my script but I haven’t been able to find something that works to check irf status. Do you?

Thanks in advance.
BjKo
Advisor

Re: IRF Monitoring with snmp

Hey there,

I want to monitor the IRF in iMC and I can't find any useful OIDs. I'm not sure wether the switch is even sending any traps when I disconnect an IRF link. 
I will look into that with debug snmp in the console when I have time.

I found the HPN-ICF-STACK-MIB in the MIB_v10 bundle, which should be for IRF.  I looked into the MIB and found the OID for IRF link port status:

hpnicf stack port status: 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.3

From the table: 1.3.6.1.4.1.11.2.14.11.15.2.91.2

 

But this MIB is not included in the iMC standard MIBs and the import fails with some unknown error. Is there a better OID to look for, perhabs already included in iMC?

Thanks alot!