HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

IRF Port-group and ASCI Port groups on HP 5920 and HP 5800

 
pdvfried
Occasional Contributor

IRF Port-group and ASCI Port groups on HP 5920 and HP 5800

Hello all,

 

on the HP 5920AF switches four 10GB Ports share one ASIC, thatswhy if you enable IRF you have to configure 4 Ports in one IRF port group. Thereby you will loose 2 ports (per group)  within dual link IRF setup. 

 

Is this the same on HP 5800-24?  If I need to single IRF Ports, do  I loose the two other 10GB ports on the buildin 4xSFP+? 

 

Thanks

Gregor

 

1 REPLY
Peter_Debruyne
Honored Contributor

Re: IRF Port-group and ASCI Port groups on HP 5920 and HP 5800

Hi,

 

The 5800 does not have this limitation to my knowledge, so any 10G port can be used for IRF without impact on the normal 10G operation of the other ports.

 

For the 5120/5500 with 10G plugin modules some restrictions do apply.

 

Best regards,Peter