IRF configuration

[tejene_bhandari]

hi everyone i have little trouble here configuring IRF on HP 5500-24G-SFP EL Switches

recently i bought

Qty = 2  HP 5500 switches

Qty = 2  HP 10Gbe SFP+ Module

Qty = 2 HP 5500  10Gbe Local Connect Module

Qty = 2 HP x230 Local Connect 100Cm CX4 Cable

here is the challenge i'm Facing !!

i want this Switch as Core Swich for WiFI Network, i have Aruba 7205 controller Qty 2

can you please help me to understand how can i connect this 2 Switches and confiure IRF ( with Command Line  on each Switch )

which cable i need to connect where ?

i have read some document on HP site but it does not make me any sense

thanks.

[Vince-Whirlwind]

If you follow the HP (or H3C) IRF guide, it takes you through it step by step.

http://www.manualslib.com/manual/759195/Hp-5500-Ei-Series.html?page=36#manual

https://www.youtube.com/watch?v=gdY-9B9pCJw

[tejene_bhandari · Accepted solution]

i have follow the same procedure unfortunately unable to make it work. 

could you please help me ?

i have 5920 switch Qty = 2 

[IPTV-Core-2] display irf
MemberID Role Priority CPU-Mac Description
*+2 Master 1 e8f7-2407-2997 ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.

The Bridge MAC of the IRF is: e8f7-2407-2996
Auto upgrade : yes
Mac persistent : 6 min
Domain ID : 0

plz help me to understand 

if it possible i would like to offer Teamviewer 

thanks. 

===========================================================================

MemberID Role Priority CPU-Mac Description
*+1 Master 1 e8f7-2407-337e ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.

The Bridge MAC of the IRF is: e8f7-2407-337d
Auto upgrade : yes
Mac persistent : 6 min
Domain ID : 0
<IPTV-Core-1>