HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

IRF configuration

 
gauravasthana
Occasional Visitor

IRF configuration

Hi,

 

I am configuring IRF between 2 switches. But while assigning the 10 GBPS port to an IRF port group, it is saying that

 

irf-port

^

% Unrecognized command found at '^' position.

 

I am not able to understand why system is not reconizing this command. Pls help...

 

 

Thanks,

Gaurav Asthana

3 REPLIES
Fredrik Lönnman
Honored Contributor

Re: IRF configuration

What model and version?

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

gauravasthana
Occasional Visitor

Re: IRF configuration

Hi,

 

Version is:-   H3C Comware Platform Software
Comware Software, Version 5.20, Release 2202P06
Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120-28C-EI

 

 

And Model is:-  H3C -- S5120

 

 

Thanks & Regards,

Gaurav Asthana

paulgear
Esteemed Contributor

Re: IRF configuration

The IRF command structures changed in recent firmware versions. Try upgrading to the latest firmware from https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=JE066A&lang=en&cc=us&prodSeriesId=4174705
Regards,
Paul