Implementing Windows DHCP Server Multiple Scope on Multiple VLANs

[MarkAM]

Good day,

Kinldy please help me on implementing my Windows DHCP Server on multiple vlans.

Hope this details may help!

Switch is HP 5500 EI

VLAN 100 - 192.168.100.0/24

VLAN 101 - 192.168.101.0/24

Windows DHCP Server - 192.168.100.108 - under VLAN 100

Scope 1 - 192.168.100.184-192.168.100.184 for testing purposes (Client on VLAN 100 can acquire IP from this Pool)

Scope 2 - 192.168.101.100-192.168.101.110 Client under VLAN 101 can't acquire IP from this Pool.

I have config on my Switch:

dhcp relay server-group 0 ip 192.168.100.108

udp-helper enable

[Vlan-interface101] dhcp select relay

[Vlan-interface101] dhcp relay server-select 0

[Philippe_D · Accepted solution]

Hi,

I assume your dhcp server has been set up correctly for vlan 101? Are you sure about this?

You also need to enter the "dhcp enable" command under system-view, I don't see this in your config.

regards,

Philippe

[MarkAM]

Thanky you very much for your help, i have already figured out the problem, and it's as you said by the command dhcp enable solve my problem.