HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Interface utilization Log & Threshold

 
Pankaj4HP
Occasional Contributor

Interface utilization Log & Threshold

Hi Guys,

I have many HP A5500-24G-4SFP HI Switch in my network, where there are complaints of traffic spike & very high utilization for a fractional second. As the utilization is for a fractional second, it doesn't get captured in the command "display interface"  output.

Can anyone please help me to configure a threshold for traffic utilization of any port & log should be generated on the switch whenever the threshold breaches, even for a fractional second.

Thanks!
Pankaj
1 REPLY
HP-Browniee
Respected Contributor

Re: Interface utilization Log & Threshold

Hi

Don't know for sure but i don't think that command exists.

I think the best way to monitor your network and traffic is to install IMC, the monitoring tool of HP. You can try this tool  30 days for free.

Kind reagrds