HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Link Aggregation Configuration

 
kinanhaffar23
Occasional Visitor

Link Aggregation Configuration

Dear;

 

I have the following setup at my company head office:

 

1. I have six 3Com Baseline 2426 PWR Plus switch "a switch for each floor", as layer 2 distribution switches

 

2. I have 2 3Com 2928 PWR Plus switches for the IP based CCTV system.

 

3. I have one 2928 POWER Plus switch for my servers connectivity.

 

4. I have one 3Com 4500G as a layer 3 core switch

 

I've already created several VLANs according to the company's department. I need to configure link aggregation between the switches.

 

Can this be done, and how?

 

Thank you for your help.

 

Regards.

2 REPLIES
jcarlos
Occasional Advisor

Re: Link Aggregation Configuration

Hi, you can do it with this Switches, you should search de configuration guides, the baseline plus have only webmanagement, is simply, The 4500 have the Web management and CLI.

 

You can use this document for 4500

 

http://www.google.com.gt/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFEQFjAB&url=http%3A%2F%2Fh20000.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc02579469%2Fc02579469.pdf&ei=xnTjT_eiGYOS9gTel5WHCA&usg=AFQjCNEruacf8cYiJFpogTqQhaJyEjjp-w

 

H3CSE

 

 

kinanhaffar23
Occasional Visitor

Re: Link Aggregation Configuration

Dear;

 

Thanks for the reply. However, please note that I already tried to configure Link Aggregation as test between the two 2928 switches, and it worked only if the ports are configured as Access ports! "Trunk and Hybrid" didn't work!

 

Now the problem is that I have the ports which are connected from each switch to the core switch configured as Hybrid ports.

 

Any ideas?

 

Thanks for the help.

 

Regards.