Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Link Aggregation between H3C and GBe2c Blade Switches (Nortel Based)

Link Aggregation between H3C and GBe2c Blade Switches (Nortel Based)

Hi, i`ve didn`t manage to get an Link Aggregation between H3C S5500-EI (Comware based) and GBe2c L2/3 Blade Switches (Nortel based) to work.

Dynamic (LACP) didn't work at all (no synchronization) and Static works, if the Ports on the H3C are in Access Mode (with an single untagged VLAN), but with Ports in Trunk mode (to get some tagged VLANs through) the channel quits and i have no access any longer... Has anyone got an Channel (dynamic or static) between 3com and GBe2c to work?

 

Any help appreciated.

 

Thank You

1 REPLY
manuel.bitzi
Trusted Contributor

Re: Link Aggregation between H3C and GBe2c Blade Switches (Nortel Based)

Hi Bernd

 

I don't think Link Aggregation it the problem, because LinkAggregation don't cares about VLAN's. Is is possible to establish a VLAN Trunk, if only one link is connected?

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland