HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Logging in console 4210

 
lucagud
Occasional Visitor

Logging in console 4210

Hi,



I would like to assign an IP address to the switch, and following the guide I tried to log me on the console.



I used the XP hyper terminal program, but everytime I switched on the 4210, I just got strange characters on the screen and no possibilities to access to any menus.



Can u please help me or tell me another way to assign the IP?



Thank u.



 



 



 



3 REPLIES
Fred_Mancen_1
Super Advisor

Re: Logging in console 4210

You need to setup the HT connection as the following parameters:



- Speed 19200



- Bits: 8



Flow control: None



Regards



lucagud
Occasional Visitor

Re: Logging in console 4210

I  used the settings of the guide 3Com_Switch4210_Configuration_Guide.pdf, which say speed= 9600.



So is this wrong?



should I use 19200?



8 bits



none



1



none



?



Thank you



 



lucagud
Occasional Visitor

Re: Logging in console 4210

And?



Is it wrong the guide?



Cheers