Mirroring - Port SWITCH 5120 only view traffic one way

[charliebraun02]

I have this mirroring group:

# mirroring group 1

# Type: local 

# status: active

# mirroring port: 

   GigabitEthernet 1/0/2  both

# monitor port : GigabitEthernet 1/0/25

I have a PC connected to 1/0/2 VLAN 110

I have other PC connected to other interface VLAN 110

I have a IDS connected to monitor port but y only view one way. Only traffic in one way (from PC 1/0/2 to switch) but i dont see traffic from switch to outbound to the PC. If i do a PING from PC to PC i only view echo request in the IDS but not reply traffic. 

My configuration is:

#interface GigabitEthernet 1/0/25

stp disable

mirroring group 1 monitor-port

#interface GigabitEthernet 1/0/2

port access vlan 110

mirroring-group 1 mirroring-port both

Any idea suggestion ? Thnx

P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. - Hp Forum Moderator

[johnk3r]

Hi !

I believe that your configuration is correct. What is the switch firmware version?