Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Mirroring - Port SWITCH 5120 only view traffic one way

charliebraun02
Occasional Visitor

Mirroring - Port SWITCH 5120 only view traffic one way

I have this mirroring group:

 

# mirroring group 1

# Type: local 

# status: active

# mirroring port: 

   GigabitEthernet 1/0/2  both

# monitor port : GigabitEthernet 1/0/25

 

I have a PC connected to 1/0/2 VLAN 110

I have other PC connected to other interface VLAN 110

I have a IDS connected to monitor port but y only view one way. Only traffic in one way (from PC 1/0/2 to switch) but i dont see traffic from switch to outbound to the PC. If i do a PING from PC to PC i only view echo request in the IDS but not reply traffic. 

 

My configuration is:

 

#interface GigabitEthernet 1/0/25

stp disable

mirroring group 1 monitor-port

 

#interface GigabitEthernet 1/0/2

port access vlan 110

mirroring-group 1 mirroring-port both

 

Any idea suggestion ? Thnx

 

 

P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. - Hp Forum Moderator

 

1 REPLY
johnk3r
Respected Contributor

Re: Mirroring - Port SWITCH 5120 only view traffic one way

Hi !

 

I believe that your configuration is correct. What is the switch firmware version?

**************************************
ATP FLEXNETWORK V3 | ACSA