Multiple LAN on a A3600

[Jacques Tessier]

We want to connect 12 IP phones on the first 12 ports of the switch and 12 desktops on the next 12 ports.

The device is all fiber

The A3600 will be our access layer switch

We would like to assign 12 ports to 1 uplink port and the other 12 to the other uplink port.

Is this do-able, we heard that we needed 2 switches to segregate the networks between phones and desktops.

Our preference is to have the phones using a different IP range than the desktops

Our goal is to use all of the ports on the switch but treat the switch as if it was 2 switches.

[Fredrik Lönnman · Accepted solution]

You might want to look up how VLAN works, and stop listen to whoever told you its not doable.

One VLAN for phones and one for desktops, all set.