Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple ssid mapping to multiple vlans config in wx 3010series wireless switch

vamsikrushna
Advisor

Multiple ssid mapping to multiple vlans config in wx 3010series wireless switch

 

 

Hi,

 

I have multiple vlans in my network and clients are getting ip addresses from dhcp server through respective vlans(udp helper is configured for this).and wireless switch is configured with single ssid which is mapped to vlan 1 wireless users are accessing

wifi through this ssid and these are getting vlan 1 ip addresses its fine.

 

But we need configuration of SSId mapping to VLAns below mentioned

 

SSID 1 --vlan 1   (working fine)

SSID 2 ---vlan 101

 

SSID 3 --vlan 102

 

SSID 4 --vlan 103

like this...

 

We have tried by tagging and untagging of ports to respective vlans in wireless controller but not happend.

 

Any sample config is available pls send to us.

 

Thanks,

 

Vamsi

1 REPLY
vamsikrushna
Advisor

Re: Multiple ssid mapping to multiple vlans config in wx 3010series wireless switch

 

 

Hi Pls find the attachments which includes the config file and connectivity diagram.

 

We have multiple vlans in our network for wired and wireless also.users are getting ip addresses from respective vlans from dhcp server for wired .

 

And wireless we have configured multiple ssids for each and every vlan.wireless users should get from respective ssids when they connected.

 

regards,

vamsi