cancel
Showing results for 
Search instead for 
Did you mean: 

NLB with A5800

iyf
Occasional Visitor

NLB with A5800

Hi

 

I am currently experiencing an issue with multicast traffic working on an A5800. Basically, the static ARP entries that are required to make this work only ever bind to a single port. I've tried tying them to individual ports and also declaring it globally, which according to the ARP table, picks up the most recently used port.

 

I cannot add more than one interface for the static ARP entry. My current software is as follows:

 

Comware Software, Version 5.20, Release 1211P08
Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
HP A5800-48G Switch

 

Are there commands in later software versions that will allow the addition of multiple ports under the static ARP command?

 

 

Thanks

1 REPLY
manuel.bitzi
Trusted Contributor

Re: NLB with A5800

Hi iyf

 

Yes, in the newest release R1808Pxx multiport ARP was added to the featureset. Check the release notes.

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland