HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to get snmp information 4210 configured i

 
vijayakumartt20
Occasional Contributor

Not able to get snmp information 4210 configured i

Hai,



We are having seven 3com 4210  switches configured in cluster. ie One master + 6 members.  SNMP functionality has been enabled on all the switches using cluster snmp-agent command as per the 3com document. The SNMP information in all the switches are like 3com@cm0, 3com@cm1 3com@cm2 etc... ( Example only) . My requiement is to plot the network traffic utlization of the entire switch cluster using single SNMP. I am using prtg/cacti/mrtg for this. The thing is that when ever i access the snmp information with 3com@cm0 i was able to get master switch traffic only. If i use 3com@cm1 or 3com@cm2 i will not be in a position to get any thing. If any body in the group know the how to monitor the switch cluster using single SNMP string please let me know.



 



Thanks and Regards.



 



Vijay