PRoblem with 5500G-EI 24SFP with 10GB xenpak

[MAKNBX]

Hi all,

i have a problem with 5500G-EI (24 SFP) with module 3C17261 with xenpak 3CXENPAK94 connect to 4800G with 10GB module XFP.

My problem is when i try to passtrought in this link plus VLAN then the VLAN 1.

Seems to be that in this link pass only one VLAN.

I try to configure the link in a port link-type hybrid and also port link-type trunk but only VLAN 1 passtrought into a link.

In a 5500 the version is 3.03.02S168P19 and in a 4800 5.20 release 2202P15.

Help Me.

Thansk for all

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. -HP Forum Moderator

[Fredrik Lönnman]

Paste some relevant config? dis cur int, dis vlan etc.

[MAKNBX]

Hi, thanks for respons.

Also say you that the two configuration is sample like a problem, is it possibile to passtrought hte 10gb link plus vlan then the 1 management?

THANKS

Follow two configuration :

<4800G>display current-configuration
#
 version 5.20 Release 2202P15, Release 2202P15
#
 sysname 4800G
#
 irf mac-address persistent timer
 irf auto-update enable
 undo irf link-delay
#
 domain default enable system
#
 telnet server enable
#
 undo ip ttl-expires
#
 undo cluster enable
#
igmp-snooping
#
vlan 1
 igmp-snooping enable
#
vlan 100
#               
vlan 208
 description NBX
 igmp-snooping enable
#
radius scheme system
 server-type extended
 primary authentication 127.0.0.1 1645
 primary accounting 127.0.0.1 1646
 user-name-format without-domain
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
#
local-user admin
 authorization-attribute level 3
 service-type telnet terminal
local-user manager
 password simple manager
 authorization-attribute level 2
 service-type telnet terminal
local-user monitor
 password simple monitor
 authorization-attribute level 1
 service-type telnet terminal
#
interface NULL0
#
interface Vlan-interface1
 ip address 10.10.0.23 255.255.240.0
#
interface GigabitEthernet1/0/1
 port access vlan 208
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/2
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable     
 stp edged-port enable
#
interface GigabitEthernet1/0/3
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/4
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/5
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/6
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/7
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/8
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/9
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/10
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/11
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/12
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/13
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/14
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/15
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/16
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/17
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#               
interface GigabitEthernet1/0/18
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/19
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/20
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/21
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/22
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/23
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/24
 broadcast-suppression pps 3000
 undo jumboframe enable
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/25
 shutdown
 broadcast-suppression pps 3000
 undo jumboframe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/26
 shutdown
 broadcast-suppression pps 3000
 undo jumboframe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/27
 shutdown
 broadcast-suppression pps 3000
 undo jumboframe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/28
 shutdown
 broadcast-suppression pps 3000
 undo jumboframe enable
 stp edged-port enable
#
interface Ten-GigabitEthernet1/2/1
 port link-type hybrid
 port hybrid vlan 100 208 tagged
 port hybrid vlan 1 untagged
#
 ip route-static 0.0.0.0 0.0.0.0 10.10.0.2
#
 snmp-agent
 snmp-agent local-engineid 8000002B0320FDF1849A41
 snmp-agent community read public
 snmp-agent community write private
 snmp-agent sys-info version all
#
user-interface aux 0
 authentication-mode scheme
user-interface aux 1 8
user-interface vty 0 4
 authentication-mode scheme
#
return




****************************************************

<4800G>display version
3Com Corporation
Switch 4800G PWR 24-Port Software Version 5.20 Release 2202P15
Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved.
Switch 4800G PWR 24-Port uptime is 0 week, 0 day, 0 hour, 44 minutes

Switch 4800G PWR 24-Port with 1 Processor
256M    bytes SDRAM
32768K  bytes Flash Memory

Hardware Version is REV.C
CPLD Version is 002
Bootrom Version is 604
[SubSlot 0] 24GE+4SFP+POE Hardware Version is REV.C
[SubSlot 2] 1 XFP Hardware Version is REV.B

_ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  _

<5500G-EI>display current-configuration
#
 sysname 5500G-EI
#
 undo password-control aging enable
 undo password-control length enable
 undo password-control history enable
 password-control login-attempt 3 exceed lock-time 120
#
 local-server nas-ip 127.0.0.1 key 3com
#
 igmp-snooping enable
#
radius scheme system
#
domain system
#
local-user admin
 service-type telnet terminal
 level 3
local-user manager
 password simple manager
 service-type telnet terminal
 level 2
local-user monitor
 password simple monitor                  
 service-type telnet terminal
 level 1
#
 stp disable
#
acl number 3997
 rule 0 permit ip dscp ef
 rule 1 permit tcp destination-port eq www
 rule 2 permit udp destination-port eq snmp
 rule 3 permit udp destination-port eq snmptrap
 rule 4 permit ip dscp cs6
 rule 5 permit ip dscp cs7
#
acl number 4999
 rule 0 permit type 8868 ffff
 rule 1 permit source 00e0-bb00-0000 ffff-ff00-0000
 rule 2 permit source 0003-6b00-0000 ffff-ff00-0000
 rule 3 permit source 00e0-7500-0000 ffff-ff00-0000
 rule 4 permit source 00d0-1e00-0000 ffff-ff00-0000
 rule 5 permit source 0001-e300-0000 ffff-ff00-0000
 rule 6 permit source 000f-e200-0000 ffff-ff00-0000
 rule 7 permit source 0060-b900-0000 ffff-ff00-0000
 rule 8 deny dest 0000-0000-0000 ffff-ffff-ffff
#                                         
qos-profile default
 packet-filter inbound link-group 4999 rule 8
 traffic-priority inbound ip-group 3997 rule 0 cos voice
 traffic-priority inbound ip-group 3997 rule 4 cos network-management
 traffic-priority inbound ip-group 3997 rule 5 cos network-management
 traffic-priority inbound link-group 4999 rule 0 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 1 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 2 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 3 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 4 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 5 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 6 dscp ef cos voice
 traffic-priority inbound link-group 4999 rule 7 dscp ef cos voice
#
vlan 1
 igmp-snooping enable
#
vlan 100
#
vlan 208
 igmp-snooping enable
#
interface Vlan-interface1
 ip address 10.10.0.22 255.255.240.0      
#
interface Aux1/0/0
#
interface GigabitEthernet1/0/1
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/2
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/3
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/4
 stp edged-port enable
 broadcast-suppression pps 3000           
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/5
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/6
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/7
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/8
 stp edged-port enable
 broadcast-suppression pps 3000           
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/9
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/10
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/11
 stp edged-port enable
 port link-type hybrid
 port hybrid vlan 100 208 tagged
 port hybrid vlan 1 untagged
 broadcast-suppression pps 3000
 shutdown
 undo jumboframe enable
 apply qos-profile default                
#
interface GigabitEthernet1/0/12
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/13
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/14
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/15
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default                
#
interface GigabitEthernet1/0/16
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/17
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/18
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/19
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default                
#
interface GigabitEthernet1/0/20
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/21
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/22
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/23
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default                
#
interface GigabitEthernet1/0/24
 stp edged-port enable
 broadcast-suppression pps 3000
 shutdown
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/25
 stp edged-port enable
 port link-type hybrid
 port hybrid vlan 100 208 tagged
 port hybrid vlan 1 untagged
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/26
 stp edged-port enable
 broadcast-suppression pps 3000
 shutdown
 undo jumboframe enable
 apply qos-profile default
#                                         
interface GigabitEthernet1/0/27
 stp edged-port enable
 broadcast-suppression pps 3000
 shutdown
 undo jumboframe enable
 apply qos-profile default
#
interface GigabitEthernet1/0/28
 stp edged-port enable
 broadcast-suppression pps 3000
 undo jumboframe enable
 apply qos-profile default
#
interface TenGigabitEthernet1/1/1
 port link-type hybrid
 port hybrid vlan 100 208 tagged
 port hybrid vlan 1 untagged
#
interface Cascade1/2/1
#
interface Cascade1/2/2
#
interface NULL0
#                                         
 voice vlan mac-address 0001-e300-0000 mask ffff-ff00-0000 description Siemens AG phone
 voice vlan mac-address 0060-b900-0000 mask ffff-ff00-0000 description Philips and NEC AG phone
#
 ip route-static 0.0.0.0 0.0.0.0 10.10.0.2 preference 60
#
 snmp-agent
 snmp-agent local-engineid 8000002B4001C68F69806877
 snmp-agent community read public
 snmp-agent community write private
 snmp-agent sys-info version all
#
user-interface aux 0 7
 authentication-mode scheme
user-interface vty 0 4
 authentication-mode scheme
#
return





***************************************************************

<5500G-EI>display version
3Com Corporation
Switch 5500G-EI Software Version 3Com OS V3.03.02s168p19
Copyright (c) 2004-2012 3Com Corporation and its licensors, All rights reserved.
Switch 5500G-EI uptime is 0 week, 0 day, 0 hour, 43 minutes

Switch 5500G-EI SFP 24-Port with 1 Processor
128M    bytes SDRAM
16384K  bytes Flash Memory
Config Register points to FLASH

Hardware Version is REV.B
CPLD Version is 004
Bootrom Version is 5.05
[Subslot 0] 24SFP+4GE  Hardware Version is 00.00.00
[Subslot 1] 1 Xenpak Hardware Version is REV.D
            CPLD Version is 002
            Bootrom Version is 220
[Subslot 2] 2 STACK Hardware Version is REV.B

[MAKNBX]

Hi all,

any users have some ideas for qhy is not function.

It's a simple configuration and a sample configuration to have a multiple VLAN pass trought the 10GB link.

I have no idea for qhy the VLAN different as a VLAN ID 1 not possible to pass the link like another link i try like a 1GB with transciever plus also LACP portocol.

I hope to try the risolution......and help me

Thanks for all