HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Plink issue with HP Switch

 
Pankaj4HP
Occasional Contributor

Plink issue with HP Switch

Hi Guys,

I use PLINK to take back-up of my network devices. It works absolutely fine with all my cisco devices.

 

But it doesn't work well with HP devices.

When i use Plink with HP A5500 HI Switch, session is established & gets disconnected only after entering any command on switch, i.e. when the output is started, session gets terminated.

When I use Plink with HP A5510 HI switch, session is establiched but all my listed commands are typed even before the banner appears & then after banner, session hangs at Switch prompt.

 

Request you all if any one can help me to fix this out. I really need it.

 

Thanks!
Pankaj
1 REPLY
Pankaj4HP
Occasional Contributor

Re: Plink issue with HP Switch

Awaiting for anyone's support please.

If no idea about plink, plz let me know any procedure, through which I can automatically take configuration backup of HP switch on my windows/linux machin through running any command on windows/linux maching from where ssh to HP Switch is possible..

Thanks!
Pankaj