Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem after a firmware upgrade

 

Problem after a firmware upgrade

Bonsoir All,

I have a weird problem with 3 switchs A5500 (JG311A) after an upgrade.

I did the next steps :

- tftp ;
- bootrom update file A5500HI-CMW520-R5501P25.bin slot  ;
- copy a5500hi-cmw520-r5501p25.bin slot2#flash:/ ;
- copy a5500hi-cmw520-r5501p25.bin slot3#flash:/ ;
- boot-loader file A5500hi-cmw520-r5501p25.bin slot all main ;
- reboot slot 3 (or reboot slot 2 or reboot slot 1, same problem).

then agfter reboot, I saw this message : "System is busy in recovering configuration, please wait a moment"
then I type "display boot-loader", I get these :

<sw-mop-irf>display boot-loader
 Slot 2
The current boot app is:  flash:/a5500hi-cmw520-r5501p21.bin
The main boot app is:     flash:/a5500hi-cmw520-r5501p25.bin
The backup boot app is:   flash:/
 Slot 1
The current boot app is:  flash:/a5500hi-cmw520-r5501p21.bin
The main boot app is:     flash:/a5500hi-cmw520-r5501p25.bin
The backup boot app is:   flash:/a5500hi-cmw520-r5206.bin
 Slot 3
The current boot app is:  flash:/a5500hi-cmw520-r5501p21.bin
The main boot app is:     flash:/a5500hi-cmw520-r5501p25.bin
The backup boot app is:   flash:/

 

And after the error message :

<sw-mop-irf>display boot-loader
 Slot 2
The current boot app is:  flash:/a5500hi-cmw520-r5501p21.bin
The main boot app is:     flash:/a5500hi-cmw520-r5501p21.bin
The backup boot app is:   flash:/
 Slot 1
The current boot app is:  flash:/a5500hi-cmw520-r5501p21.bin
The main boot app is:     flash:/a5500hi-cmw520-r5501p21.bin
The backup boot app is:   flash:/a5500hi-cmw520-r5206.bin
 Slot 3
The current boot app is:  flash:/a5500hi-cmw520-r5501p21.bin
The main boot app is:     flash:/a5500hi-cmw520-r5501p21.bin
The backup boot app is:   flash:/

 

Someone can help me ? :)

Best regards,

Jacques

1 REPLY
HP-Browniee
Respected Contributor

Re: Problem after a firmware upgrade

Hello

Can u give all the boot message info?

If it is a stack of 3 switches, try to shutdown all of them at the same time.

Or try a lower software version to see if you have the same problem.

 

Kind regards