Question about E4800..?

[MohammadH]

Hi

We have about 50 to 70 switch E4800 and E2910 we use PCM+ 3.20 for Network Management for both switch 

l want to ask what the best program to manage the switch E4800 because it have some problem with PCM+ 3.20  l search for one and find HP iMC what is the different between the two (PCM+ 3.20) and (iMC) and there two version for iMC Standard and Enterprise what the different between them ???

and thank you

[Richard Litchfield]

IMC = Intelligent Management Centre. It is a multivendor management platform (currently it has support for 220 vendors, and and 6000+ devices).

Standard and enterprise differ mainly in their scalability (and a few initial licence count differences). If you are only ever going to manage up to 100 devices, the standard edition will be just fine. If you want to scale to 100s or 1000s, and/or you want to add a lot of additional modules, the enterprise is the way to go.

PCM 4 is available now; it will do a better job of managing the Comware/3com/H3C products than earlier PCM versions.

[MohammadH]

Thank you for your replay and your explain

Best Regard

[MohammadH]

Hi

I update the switch E4800 to the latest update (A5500EI-CMW520-R2215) it working fine but the time in the switch go back to default time l configure the NTP same as before but I not taking the new time ???

What l do ??

Thank you

Best Regard