Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Question on load sharing of an aggregate

LLarouanne
Occasional Advisor

Question on load sharing of an aggregate

hello,

 

I have a PC connected to an IRF stack. This stack is connected to the core network thanks to an aggregate of two links. 

 

I would like to know the command that would let me know on which port of the aggregate passes the traffic to my PC.
This would allow me to see if the load sharing of the aggregate working properly ...

 

In advance thank you.

2 REPLIES
Sietze Reitsma
Respected Contributor

Re: Question on load sharing of an aggregate

display counters inbound|outbound interface

 

shows both individual ports (belonging to link aggregation group) and bridge aggregation interface. 

Apachez-
Trusted Contributor

Re: Question on load sharing of an aggregate

Except for the counters you can also verify current configuration through:

display link-aggregation load-sharing mode

Note however that there is one global setting (which seems to have more options) and a local setting (per trunk).

As I understand this command (globally) should bring you the most detailed loadsharing (that is traffic between two hosts will utilize both links for multiple sessions):

link-aggregation load-sharing mode destination-ip source-ip destination-port source-port