Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

RADIUS attributes for SSH login on HP 7500 Series

louinux
Occasional Visitor

RADIUS attributes for SSH login on HP 7500 Series

Hello

 

I'm using a HP 7506

I would like to authenticate SSH connection to the CLI using a RADIUS server.

I manage to configure my RADIUS server (On a windows server 2012) and my switch as a RADIUS client.

When trying to open SSH session, I always receive the message "Access Denied" if i chosse "Radius Extended" in my configuration, and it's OK, if i chosse "Radius Standard", but in this case, my level access is 0

 

It seems the attributes are not good...

 

Wath are the attributes for HP-7506

 

I have the same configuration for switch HP 5120, HP 5500, HP 1910 => all is good.

 

Thanks

2 REPLIES
EricAtHP
Esteemed Contributor

Re: RADIUS attributes for SSH login on HP 7500 Series

SSH on Comware requires a value of 50 in the Login-Service attribute. The entire process for NPS is documented in the HP FlexCampus Reference Architecture Deployment Guide strarting on page 50.

 

http://www8.hp.com/h20195/v2/GetPDF.aspx/c04311475.pdf

 

Hope this helps,
Eric

louinux
Occasional Visitor

Re: RADIUS attributes for SSH login on HP 7500 Series

Hello !

 

super ! it's good !! All is OK.

 

Thank's