Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Radius troubles with 6125G

SOLVED
Go to solution
Mauro Biagi
Occasional Advisor

Radius troubles with 6125G

Hi,

I have some problems with radius authentication.

I have a Windows 2012 R2 NPS server

I'm using it with some switches (like Dell PowerConnect) without any problems.

I setup my 6125G and I can correctly logon into my switch with my domain username and password but I do not have any privileges.

Connecting via SSH:

- No privileges but I can execute command super becaming an administrator

Connecting via WEB:

- No privileges: I only see Network DIagnostic Tool

 

My firmware version is 5.20.99, Release 2112

 

This is the configuration

 

radius scheme diennea
 primary authentication XXX.XXX.XXX.XXX key cipher PASSPASSPASSPASS
 key authentication cipher PASSPASSPASSPASS
 key accounting cipher PASSPASSPASSPASS
 user-name-format without-domain
 attribute 25 car

 

domain diennea.lan
 authentication login radius-scheme diennea local
 authorization login radius-scheme diennea local
 authentication super radius-scheme diennea
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#

ssh server enable
 ssh user admin service-type all authentication-type password
#
 ip https enable
#
 load xml-configuration
#
user-interface aux 0
user-interface vty 0
 authentication-mode scheme
 user privilege level 3
 set authentication password cipher PASSWORDPASSWORD
 protocol inbound ssh
user-interface vty 1 7
 authentication-mode scheme
 user privilege level 3
 protocol inbound ssh
#

 

 

 

Any idea?

Thanks

Regards

1 REPLY
Mauro Biagi
Occasional Advisor
Solution

Re: Radius troubles with 6125G