Remote Port Mirroring between two comware Version 5 and 7

[vladi0782]

Hello

Remote Port Mirroring can be configured between two comware switches of different versions 5 and 7
Thank you for your answers

[-Alex-]

Hello  vladi0782 ,

Please check the following example:

https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0133538

Hope this helps.

[Ivan_B · Accepted solution]

Hello!

Both versions use same concepts for the remote port mirroring. Different hardware platforms may have their specifics and limitations, of course, but in general both Comware 5 and 7 versions can interoperate in one remote mirroring setup.

Hope this helps!

[vladi0782]

Thank you very much for your answers