HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

SFP+ modules

 
J4S
Frequent Visitor

SFP+ modules

I am in the process of purchasing some A5800-48G switches.

 

I want to connect them using the SFP+ ports, but wanted to know if it's possible to use SFP transceiver in these ports. 

 

These switches are not next to each other, they are quite a distance apart.

 

When I use the online configurator it does offer me the option of SFP transceiver, but someone says to me that you cannot use them?

 

Any ideas

 

J4S

3 REPLIES
sm-noc
Advisor

Re: SFP+ modules

HP A5800-48G Switch with 2 Slots: 48 RJ-45 autosensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T), Duplex: 10Base-T/100Base-TX: half or full
1000Base-T: full only
2 extended module slots
1 open module slot
4 SFP fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port

 

the 4 SFP module is good for the Ethernet only, I don't think the module slot can accomodate SFP TX, but we can still search for the module slots

J4S
Frequent Visitor

Re: SFP+ modules

The switch I have is 48 10/100/1000 ports and 4 SFP+ports, 1 slot.

 

It's the SFP+ port that I need to know if i can put an SFP transceiver in, according to the online configurator I can, well it offers me the option of placing a HP X125 1G SFP LC LH40 JD061A transceiver into one of the SFP+ slots.

 

If that works then I am good and can order the correct fibre.

 

j4s

Fredrik Lönnman
Honored Contributor

Re: SFP+ modules

Hi J4S,

The SFP+ ports in A5800 series is dual 1/10G speed so yes, you can use 1G sfps for 1G operations.

Regards,
Fredrik
---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S