HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP dot1dBaseNumPorts implementation on A3600

 
Jean-Damien
Occasional Visitor

SNMP dot1dBaseNumPorts implementation on A3600

Hi there,

 

I'm managing some COMWARE A3600 switches with SNMP. It seems that they have issues answering an SNMPGET on the dot1dBaseNumPorts  mib entry :

 

# snmpget -v2c -c <Community> <IP> .1.3.6.1.2.1.17.1.2.0
iso.3.6.1.2.1.17.1.2.0 = INTEGER: -2058310500

 

 

They're supposed to give the number of ports controlled by the bridging entity which is actually not the case here.

 

Same query works fine on other pieces of hardware like 5900 or 5120.

 

Any advices appreciated.

Jean-Damien