Comware Based
1745896 Members
4148 Online
108723 Solutions
New Discussion

Re: Switch 10Gigabit Ehternet on RJ45

 
FerminTRV
Occasional Contributor

Switch 10Gigabit Ehternet on RJ45

Hi!, I need one 10Gigabit Ehternet on RJ45 switch but i can`t find con HP switch Porfolio. Any idea or suggestion?

 

Thanks

7 REPLIES 7
cenk sasmaztin
Honored Contributor

Re: Switch 10Gigabit Ehternet on RJ45

hi

 

J9586A  support 48 10\100\1000 tx port and 4 10Gbps copper port

 

or  many copper 10Gbps port J9642A chasis switch

 

 

cenk

MichaelM55
Trusted Contributor

Re: Switch 10Gigabit Ehternet on RJ45

This  is really missing on HP´s portfolio, something like a (stackable) switch with 24x or 48x 10Gbe @ RJ45

FerminTRV
Occasional Contributor

Re: Switch 10Gigabit Ehternet on RJ45

I need some thing very simple: very quickly and low inteligence. The goal it`s use for iscsii pourposes. 16ports 10GBaseT (RJ45). All that i found its SFP+ based and I need RJ45 conector with CAT6A cables. I think that is not exist in HP portfolio.

In founded J9538A but it`s based in SFP+ and in can`t use it.
cenk sasmaztin
Honored Contributor

Re: Switch 10Gigabit Ehternet on RJ45

hi

very chiper solutions other vendor

 

 

J9642A HP 5406 zl Switch with Premium Software HP Networking                    1

J8712A HP 875W zl Power Supply HP Networking                                                 1

J9546A HP 8-port 10GBASE-T v2 zl Module HP Networking                                 2

 

approximately 14K 

cenk

Richard Litchfield
Respected Contributor

Re: Switch 10Gigabit Ehternet on RJ45

Just FYI, the only switches in the HP Networking portfolio that support 10G-base-T are the zl chassis (ie 5400 and 8200) and the 3800 (10G-base-T models available soon).

 

Don't forget that direct attach cables (DACs) are very cheap, and usually provide a low-cost solution. I take it you are not connecting HP servers/NICs with 10G-T?

FerminTRV
Occasional Contributor

Re: Switch 10Gigabit Ehternet on RJ45

Very intresting information. Perhaps it`s better wait a little for this new 3800 series.

 

Thanks a lot.

FerminTRV
Occasional Contributor

Re: Switch 10Gigabit Ehternet on RJ45

Yes, we want connect dual NIC based on 10GBaseT servers to switches 10GBaseT. (802.3an). But i am worried about copper interferences. There aren`t many experiencies with this tipe of cables and velocitity over copper.