Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch 5500- Switch 1920

-KB-
Occasional Visitor

Switch 5500- Switch 1920

Hello HP support,

 

 

 

I've a connectivity problem, so i need your support.

I actually have 2 switches 5500 and 1910. And, I'm trying to connect them using an optical fiber.

 

For that purpose, For the 5500 hp switch:  I'm using  the SPF port with transceiver:  JD118B , and for the 1910 switch, i'm using the SFP port with transceiver: J4858C .

 

I don't know why there is no connectivity between the 2 switches, and i've also noticed that the SFP LED ports don't  turn on !

 

Need some help.

 

Regards,

 

K B

 

 

 

3 REPLIES
johnk3r
Respected Contributor

Re: Switch 5500- Switch 1920

Hello,

Hmmm
....

Updated firmware? Switch 1910 is POE? You can test the communication between 5500 + other HP switch model? Any specific error when you run a "display" on the interface?

The transceiver models should operate these switches ...
**************************************
ATP FLEXNETWORK V3 | ACSA
Vince-Whirlwind
Honored Contributor

Re: Switch 5500- Switch 1920

Swap the fibre ends around at one end of the fibre patch lead - you need for there to be a X in the patch lead so that RX at one end is connected to TX at the other end.

manuel.bitzi
Trusted Contributor

Re: Switch 5500- Switch 1920

Hi KB

 

Be default the fiber ports of the 5500 are disabled, because they are combo ports. go to the switch and enable them.

 

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland