Comware Based
Showing results for 
Search instead for 
Did you mean: 

VSR1000 and bridge-aggregation

Occasional Visitor

VSR1000 and bridge-aggregation


I am pretty new to comware OS and have a VSR1000 running in GNS3 to do some POC and testing. It might not be the most used scenarion, but I wanted to do a interface bridge-aggregation config since we use this on the switches in production. I am starting to believe I am blind or it's not supported.

I can define the interface fine;

interface Bridge-Aggregation2
 description D2-dist-sw01
 port link-type trunk
 port trunk permit vlan 1
 link-aggregation mode dynamic

But I just can't find a way to add the port to the brdige group. It seems quite clear that the command should have been "port link-aggregation group 2", but it does not come up as an optoin on the interface. I have no problem setting up a L3 route aggregation group and assign the port to it when I change gi 2/0 to "port link-mode route".


[F2DC-core-sw01]display current-configuration interface gi 2/0
interface GigabitEthernet2/0
 port link-mode bridge
 port link-type trunk
 port trunk permit vlan 1
[F2DC-core-sw01]interface GigabitEthernet2/0
[F2DC-core-sw01-GigabitEthernet2/0]port ?
  access        Set access port attributes
  hybrid        Set hybrid port attributes
  link-mode     Switch the specified interface to layer2 or layer3 ethernet
  link-type     Set the link type
  monitor-link  Monitor Link module
  trunk         Set trunk port attributes


Anyone who can help me out here?

[F2DC-core-sw01]display version
HPE Comware Software, Version 7.1.059, Release R0327L01
Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP
HPE VSR1000 uptime is 0 weeks, 0 days, 3 hours, 44 minutes
Last reboot reason : Power on
Boot image: flash:/VSR1000-CMW710-BOOT-R0327L01-X64.bin
Boot image version: 7.1.059P06, Release R0327L01
  Compiled Jul 31 2017 16:00:00
System image: flash:/VSR1000-CMW710-SYSTEM-R0327L01-X64.bin
System image version: 7.1.059, Release R0327L01
  Compiled Jul 31 2017 16:00:00

CPU ID: 0x01000101, vCPUs: Total 1, Available 1
1.00G bytes RAM Memory
Basic    BootWare Version:  1.11
Extended BootWare Version:  1.11